Materials : 2 m cable
Lamp 5 watt
1 lamp house
1 Switch
1 The head end of the cable
1 Electric bell
Equipments : Scissors
Screwdiver
Special Cables Tape
Screwdiver
Special Cables Tape
The Steps :
- First, cut the cable as long as 10 cm 2 pieces, so the rest of the 2m cable into 180 cm.
- Second, take one piece of cable as long as 10 cm, and connect withan electric bell wiring by color.
- Third, reconnect the cable ends are not attached to the lamphousing.
- Fourth, take the cable as long as 10 cm a second, then merge intotwo pairs in the lamp housing, according to color.
- Fifth, the fifth stage is a fairly complicated, first connect the cable end is connected to the lamp housing, then paralleled with the remaining cables were 180 cm long with the switch.
- Sixth, connect the last cable end with the head end of the cable.
- Seventh, the bell is ready for use.
- First, cut the cable as long as 10 cm 2 pieces, so the rest of the 2m cable into 180 cm.
- Second, take one piece of cable as long as 10 cm, and connect withan electric bell wiring by color.
- Third, reconnect the cable ends are not attached to the lamphousing.
- Fourth, take the cable as long as 10 cm a second, then merge intotwo pairs in the lamp housing, according to color.
- Fifth, the fifth stage is a fairly complicated, first connect the cable end is connected to the lamp housing, then paralleled with the remaining cables were 180 cm long with the switch.
- Sixth, connect the last cable end with the head end of the cable.
- Seventh, the bell is ready for use.
Tidak ada komentar:
Posting Komentar